It is important and vital to be familiar with and observe the important safety points of working with steel cutting discs and milling cutters. The cutting stone plate and sub-discs are designed in order to perform cutting and sub-cutting operations faster by placing them in the grinding stone machines. Although these plates are similar to each other, they have different uses and characteristics that can be used in different situations and for cutting and wearing different materials. These hard disks are rotated by the device at a high speed of up to 100 meters per second, which is equivalent to 360 kilometers per hour, and therefore working with these plates may be associated with several risks. However, these risks can be reduced by observing the safety tips and paying attention to the information included on the brochure and the label printed on the disk and the device. Failure to observe safety precautions may sometimes lead to serious or fatal risks.
Important Safety Tips for Working with Steel Cutting That Must Be Followed
The Steel Cutting is safe only when it is used correctly and in accordance with the standards and marks on the board and the user has received the necessary training. Today, international and national standards are applied to these products, which indicates the necessary safety of Steel Cutting. You should pay attention to the fact that these standards must be used correctly, with attention and use accurately and correctly and in accordance with the signs on the product.
When buying, storing, before, and during the use of the Steel Cutting and sub, some points should be considered, some of which we will mention below.
Delivery, Handling, and Storage
Cutting and abrasion products should be handled and handled with care.
The cutting and wearing surface should be selected according to the type of application the material of the workpiece and the surfaces to be cut and worn.
These products should be properly stored and not exposed to mechanical damage and humidity.
Selection of Steel Cutting Products
Information on the product label, limitations of use, expiration date of the disc, and safety markings should be considered.
The plates used in each device must be suitable for the device and the type for which the device is designed.
Before installation, all the slabs of cut stone and slab must be visually inspected and its health must be ensured. Under no circumstances should a damaged or cracked Steel Cutting be used. For more information visit www.industrialsolution.ae.
I am inspired daily by my husband and their two daughters. In my free time, I like to go hiking, crochet and play video games with my grandson.